Reduction of the squeal noise from an automotive water pump

Nonlinear Dynamics - This paper presents a method to reduce the squeal noise generated by an automotive water pump. The noise and vibration of the water pump were analyzed through experiments, from...     

Analysis of 1:1 internal resonance of a CFRP cable with an external 1/3 subharmonic resonance

Nonlinear Dynamics - Based on the non-planar vibration equations of a cable made of carbon fiber reinforced polymer (CFRP), the nonlinear behaviors of the cable are studied. The one-to-one internal...     

Multiplasmid DNA in agarose gel electrophoresis: Suitable dye and temperature is essential for prominent profiles

Nucleic acids dye Goldview is widely used in agarose gel electrophoresis (AGE). However, in this study, a sample of multiplasmid DNA (multi-pDNA) stained with Goldview analyzed by AGE showed its instability at low temperature. Three types of DNA samples were analyzed, including linear DNA (ladder), single-plasmid DNA (single-pDNA), and multi-pDNA, electrophoretic conditions were optimized by adjusting the dye, the buffer, and the temperature (1–50°C). The results showed that the light intensity of Gelred is 2.2-times higher than that of Goldview in staining multi-pDNA. Compared with the single-pDNA and the linear DNA, the multi-pDNA stained with Goldview was greatly affected by temperature. This short communication indicated that Gelred is a highly applicable dye for analyzing multiplasmid samples. The degree and the way of binding of Goldview to multi-pDNA are greatly affected by temperature.     

Facile preparation of superhydrophobic nanorod surfaces through ion-beam irradiation

Obtaining superhydrophobic surfaces for their application in electronics and flexible wearable devices remains a significant challenge. Most previously reported methods for obtaining superhydrophobic surfaces involve complex and expensive preparation techniques and thus cannot be used for practical applications. Ion-beam irradiation is a simple and promising method for fabricating superhydrophobic nanostructures on large areas at a low cost. Ion-beam irradiation using argon and oxygen gases was used to prepare silica nanorod structures on glass substrates. This study is not just a modification of the surface of nanoparticles, but a change in nanoparticle shape. The nanorods were subsequently treated with perfluorooctyltriethoxysilane to obtain superhydrophobicity. The surface of the silica nanorods exhibited a static water contact angle of 153°, indicating superhydrophobicity. The combination of rough structures of silica nanorods and low surface energy resulted in superhydrophobicity. The surface properties were evaluated in detail using Fourier-transform infrared spectroscopy, field-emission scanning electron microscopy, and X-ray photoelectron spectroscopy. The proposed method is facile, inexpensive, and can be used for the large-scale production of nanorod structures for potential industrial applications.     

Inlaying Bismuth Nanoparticles on Graphene Nanosheets by Chemical Bond for Ultralong-Lifespan Aqueous Sodium Storage

Rechargeable aqueous sodium ion batteries (ASIBs) are rising as an important alternative to lithium ion batteries, owing to their safety and low cost. Metal anodes show a high theoretical capacity and nonselective hydrated ion insertion for ASIBs, yet their large volume expansion and sluggish reaction kinetics resulted in poor electrochemical stability. Herein, we demonstrate an electrode cyclability enhancement mechanism by inlaying bismuth (Bi) nanoparticles on graphene nanosheets through chemical bond, which is achieved by a unique laser induced compounding method. This anchored metal-graphene heterostructure can effectively mitigate volume variation, and accelerate the kinetic capability as the active Bi can be exposed to the electrolyte. Our method can achieve a reversible capacity of 122 mAh g⁻¹ at a large current density of 4 A g⁻¹ for over 9500 cycles. This finding offers a desirable structural design of other metal anodes for aqueous energy storage systems.     

Metal-Organic Frameworks for Photocatalytic Water Splitting and CO2 Reduction

Photocatalytic water splitting and carbon dioxide (CO₂) reduction provide promising solutions to global energy and environmental issues. In recent years, metal-organic frameworks (MOFs), a class of crystalline porous solids featuring well-defined and tailorable structures as well as high surface areas, have captured great interest toward photocatalytic water splitting and CO₂ reduction. In this review, the semiconductor-like behavior of MOFs is first discussed. We then summarize the recent advances in photocatalytic water splitting and CO₂ reduction over MOF-based materials and focus on the unique advantage of MOFs for clarifying the structure-property relationship in photocatalysis. In addition, some representative characterization techniques have been presented to unveil the photocatalytic kinetics and reaction intermediates in MOF-based systems. Finally, the challenges, and perspectives for future directions are proposed.     

A Janus Separator based on Cation Exchange Resin and Fe Nanoparticles-decorated Single-wall Carbon Nanotubes with Triply Synergistic Effects for High-areal Capacity Zn−I2 Batteries

Zn−I₂ batteries stand out in the family of aqueous Zn-metal batteries (AZMBs) due to their low-cost and immanent safety. However, Zn dendrite growth, polyiodide shuttle effect and sluggish I₂ redox kinetics result in dramatically capacity decay of Zn−I₂ batteries. Herein, a Janus separator composed of functional layers on anode/cathode sides is designed to resolve these issues simultaneously. The cathode layer of Fe nanoparticles-decorated single-wall carbon nanotubes can effectively anchor polyiodide and catalyze the redox kinetics of iodine species, while the anode layer of cation exchange resin rich in −SO₃⁻ groups is beneficial to attract Zn²⁺ ions and repel detrimental SO₄²⁻/polyiodide, improving the stability of cathode/anode interfaces synergistically. Consequently, the Janus separator endows outstanding cycling stability of symmetrical cells and high-areal-capacity Zn−I₂ batteries with a lifespan over 2500 h and a high-areal capacity of 3.6 mAh cm⁻².     

A Versatile Strategy for Screening Custom-Designed Warhead-Armed Cyclic Peptide Inhibitors

Demand for peptide-based pharmaceuticals has been steadily increasing, but only limited success has been achieved to date. To expedite peptide-based drug discovery, we developed a general scheme for cell-based screening of cyclic peptide inhibitors armed with a user-designed warhead. We combined unnatural amino acid incorporation and split intein-mediated peptide cyclization techniques and integrated a yeast-based colorimetric screening assay to generate a new scheme that we call the custom-designed warhead-armed cyclic peptide screening platform (CWCPS). This strategy successfully discovered a potent inhibitor, CY5-6Q, that targets human histone deacetylase 8 (HDAC8) with a K_D value of 15 nM. This approach can be a versatile and general platform for discovering cyclic peptide inhibitors.     

A Photo- and Thermo-Driven Azoarene-Based Circularly Polarized Luminescence Molecular Switch in a Liquid Crystal Host

The development of chiral optical active materials with switchable circularly polarized luminescence (CPL) signals remains a challenge. Here an azoarene-based circularly polarized luminescence molecular switch, (S, R, S)-switch 1 and (R, R, R)-switch 2 , are designed and prepared with an (R)-binaphthyl azo group as a chiral photosensitive moiety and two (S)- or (R)-binaphthyl fluorescent molecules with opposite or the same handedness as chiral fluorescent moieties. Both switches exhibit reversible trans/cis isomerization when irradiated by 365 nm UV light and 520 nm green light in solvent and liquid crystal (LC) media. In contrast with the control (R, R, R)-switch 2 , when switch 1 is doped into nematic LCs, polarization inversion and switching-off of the CPL signals are achieved in the resultant helical superstructure upon irradiation with 365 nm UV and 520 nm green light, respectively. Meanwhile, the fluorescence intensity of the system is basically unchanged during this switching process. In particular, these variations of the CPL signals could be recovered after heating, realizing the true sense of CPL reversible switching. Taking advantage of the unique CPL switching, the proof-of-concept for “a dual-optical information encryption system” based on the above CPL active material is demonstrated.     

Development and validation of a sensitive ultra-high-performance liquid chromatography-tandem mass spectrometry method for quantitative analysis of bambermycin in livestock and aquatic products: Implications for food safety control and regulatory enforcement

A sensitive and accurate analytical method was developed and validated to detect bambermycin, a commonly used antibiotic in animal feed and livestock. The presence of bambermycin residues in food products can pose health risks to consumers, emphasizing the need for a sensitive and accurate analytical method. A reversed-phase analytical column was utilized with a mobile phase comprising 0.005 mol/L ammonium acetate in 5% acetonitrile (A) and 0.005 mol/L ammonium acetate in 95% acetonitrile (B) to achieve effective chromatographic separation. Quantitative determination of bambermycin in various samples, including beef, pork, chicken, milk, eggs, flatfish, eel, and shrimp, was performed using ultra-high-performance liquid chromatography-tandem mass spectrometry. Sample extraction involved a mixture of methanol and a 25% ammonium hydroxide solution, followed by low-temperature purification and phospholipid removal utilizing a Phree cartridge. The method exhibited a satisfactory recovery rate ranging from 69% to 100%. Validation results demonstrated the reliability, robustness, and accuracy of the method, exhibiting good linearity, precision, and recovery. This validated method can be applied for routine analysis of bambermycin residues, assisting in the development of effective monitoring and control measures to ensure the safety of livestock and aquatic products.